3d:T423,<ul><li>Installation must be done in a well-ventilated open area, away from any source of heat (sun rays, heater/oven/gas stove), away from dusty locations & moist areas. It should not be placed where there is danger of water falling on to the product & its power adapter.</li><li>Power supply must be in the range of 160V to 230V.</li><li>Take the product out of the packaging.</li><li>Keep the product on a hard surface with at least 15cm gap from all sides for proper air ventilation.</li><li>Place the product in the pre-determined location near the power source.</li><li>Keep the power adapter 50 cm away from the cooling unit.</li><li>Avoid use of extension board.</li><li>Connect the 3 pin power adapter to the wall socket.</li><li>Connect the output pin of the power adapter into the socket on the unit.</li><li>Switch ON the power. Check for smooth functioning of the fan and the temperature display.</li></ul>3e:T52a,<p> Keep flammable material away from the product as it may create risk of fire or explosion. Electrical shock hazards: Do not install the unit in an area where there is possibility of water falling on the product / power adapter / plug / socket / power bank. Ensure that the power supply is stable in the range of 160V~ 230V. Check for any damage on wire/ plug / power adapter. Do not climb on the product. Be careful not to trap fingers while closing the lid. Avoid placing the unit in dusty or humid environment, it is recommended to keep the unit in dry well-ventilated space. Do not keep the unit in direct sunlight or near heat sources like the kitchen stove. Wipe the moisture developed inside the unit with a dry cloth. Open the unit only when required and minimise door openings. Ensure that the lid is securely locked after usage. Do close the lid gently, do not use excessive force to close the lid. Before storing insulin inside the product it needs to be pre-cooled in a temperature range between 2¬∞- 8C. While administering insulin, do follow the advice of your doctor/diabetologist on the correct insulin temperature at which the dosage needs to be administered. Do not use scouring pads, powdered cleaners, bleach or cleaners containing bleach to clean the unit. </p>3f:T449,

The Godrej InsuliCool Portable Insulin Cooler keeps insulin at the safe temperature of 2-8°C when connected to a power source like an external power bank or car adapter, but it does not operate on a battery alone for many hours without charging.

🩺 Usage Details

This cooler relies on a continuous power supply via an adapter or a compatible external power bank (such as a 20,000 mAh power bank) to maintain cooling.
It does not specify a standalone battery life or exact hours of cooling without power input.

🏥 Travel Recommendation

For uninterrupted cooling over 36 hours of travel, ensure you carry a sufficiently charged external power bank or use the car adapter continuously.
Consider backup power solutions if your travel exceeds typical power bank durations.

🩺 Consultation Advice

It's best to consult your diabetologist or an endocrinologist to confirm that your insulin storage during travel meets safety needs and to get personalized advice on insulin cooler options and power requirements.

Health queries for Godrej InsuliCool Portable Insulin Cooler, 1 Count